STRONG Pedicure machine MediPro (CMDV4) HMD03 (40000 rpm)

Strong MediPro Pedicure Device CMDV4 with HMD03 Handpiece and Suction Function

The MediPro device is produced in South Korea by Saeshin, one of the worlds leading manufacturers of dental and manicure-pedicure micro motor devices, known and renowned worldwide under the brand Strong, and also under the lesser-known brands Brillian and Traus. The high quality, attention to detail, and modern design are characteristic features of Saeshin. The Saeshin MediPro is the “big brother” of the world-famous Saeshin Medi Power pedicure device. Although these two models look almost identical, the “filling” of the Saeshin MediPro is different and more modern. The maximum speed of the Saeshin MediPro is 40,000 RPM, which is 10,000 RPM more than the Saeshin Medi Power, and the torque is increased by 2 Ncm. While an increase in power would typically be associated with an increase in weight, the new handpiece is 10g lighter thanks to the use of a brushless motor, which reduces both the weight and noise.

Warranty: 12 months for the control unit and 6 months for the handpiece.

Technology:

• Speed: up to 40,000 RPM
• Brushless motor: no need for brush replacement (lighter weight and much quieter compared to rotor motors with brushes)
• Modern, easy-to-use membrane keyboard
• Reverse (bit rotation direction both left and right)
• Brushless motor bit: no need for brush replacement
• High torque, low vibration, and quiet operation
• Suitable for all standard bits with a 2.35 mm shaft
• Double-sealed ball bearings

Technical Specifications:

• Dimensions: L 273 x W 142 x H 235 mm (including external parts: L 313 x W 142 x H 235 mm)
• Suitable for all transport modes
• Total weight: 4.9 kg
• Power: 120V
• Voltage: 230 V, 50 Hz, 230 W
• Noise level: 49 dB (55 dB at full power)
• Handpiece: 27 mm, length: 265 mm, weight: 368 g

Beware of Counterfeits and Fake Products!

Signs of Original Products:

• Certificate
  Before purchasing, always request a Certificate of Compliance from the seller.

• Warranty Period
  Original Saeshin products come with a 12-month warranty.

• Manufacturer’s Engraving
  The handpiece body is engraved with the name, model, and serial number. The inscriptions must be clearly readable.

• Power Cord
  Original devices from South Korea will have one of these markings on the power cord: KOREA CORD CO., LTD. or DONG YANG.

• Brand Sticker
  The original base casing is equipped with a special informational sticker on the bottom of the device. Check for font, proportions, and iconography accuracy.

• Design
  Ensure that the shape of the casing, the color scheme of the base and handpiece, as well as the fonts used in the selected model, match the official specifications.

USAGE AND MAINTENANCE:

• Change the rotation directionto reverseONLY after the motor has COMPLETELY STOPPEDand switch the buttonFWD/REV.
• Alwaysstop the speed completelybefore changing the cutter!
• Cutter diameteris2.35 mm, its minimum length is10 mm.
• Do not userusty or damaged cutters, as this may cause premature wear of the micromotor bearings.
• Do not install a wet or dusty cutterin the micromotor.
• ALWAYS STORE the micromotor with the installed cutter.
• Avoid damaging the device.
• NEVER turn on the micromotor without a cutter or nozzle!
• NEVER immerse or wash the micromotor!

What to do:

At the end of each workday, it is necessary to:

• Clean the external partsof the device with a soft cloth using alcohol-based cleaning fluids or a vacuum cleaner.
• Clean the exposed cutterwith a brush.
• Periodically performregular maintenance: cleaning, adjusting, brush replacement, etc.
• Cleaning frequencydepends on the devices usage intensity and conditions.
• The recommended frequency for professional use isat least every three months.
• Cleaning should be done by a qualified technician!
• Upon first signs of operational issues,immediately contact the Nailinfinity service center.

  Saeyangbrand offershigh-quality toolsfor professional manicure and pedicure treatments. Saeyang products, highly valued by cosmetologists, offerexcellent precision,innovative solutions, andhigh development quality.